Skip to content

PEDESTALS

Pedestals from WEISS raised floor systems

All Weiss raised floor pedestals are made from galvanized, blue passivated steel. The range covers small pedestals to compensate for irregularities in hollow floor systems through to customized heavy-duty pedestals in a wide variety of lengths.

We offer our customers the entire range of sizes and variations, also in individual intermediate lengths. When laying raised access floor panels, the most commonly used pedestals are the so-called M16 and M20 pedestals.

Description

Description

  1. The pedestal is glued to the raw floor with PU glue. The surface must be firm, dry and resilient so that the connection is perfect and durable. A double anchorage of the pedestal is optional.
  2. Once the pedestal is fully fixed, the height of each pedestal can be finely adjusted and then get locked mechanically with a lock screw.
  3. The adjustment range for the pedestals has a range 25 mm to 2,000 mm. Special heights are possible depending on the application. Up until now, maximum heights of 5,000 mm have been realized.
  4. Precision, high load-bearing capacity and well thought-out details that make life easier for the fitter are the hallmarks of our pedestals.

Models

M20 (Socket pedestal)

The M20 pedestal is available in a standard version with a 24 x 2 mm leg or a heavy-duty version with a 26 x 3 mm leg.

During installation, the pedestal is inserted into the leg and then the height is adjusted with a nut.

As the M20 pedestal comes in different variants depending on the application and load requirements, it is ideally suited for use in high raised floor installations where large load-bearing capacities are required.

M16 (Screw pedestal)

The M16 pedestal base has a 22 x 1.8 mm leg with a threaded socket, and the selected pedestal head is screwed onto the pedestal itself.

Screw pedestals are especially suited to installations with restricted heights or low load-bearing capacity, where they offer an ideal balance between economy and functionality.

M12 (Screw pedestal)

Small base plate – large head plate for an optimal and economic installation of hollow floor systems in wet or dry version.

The M12 pedestal with a 14 x 1.1 mm leg has a threaded socket, so that the respective head can be screwed to the pedestal base.


CS | DS HEAD

Weiss manufactures a unique universal head that is equally suited to carrying support stringers or C-profiles.

The CS/DS topside is designed to match the M20 socket pedestal (24 x 2 mm or 26 x 3 mm) and can be used in all common floor systems.

As the heads are universal, they can bear either raised floor panels or stringers for horizontal stiffening.

Furthermore, both C-profiles and stringers can be fastened in a variety of orientations.


CF | DF HEAD

The CF/DF topside fits perfectly with existing edges, and is therefore often used in switch room pedestals when building the framework.

It can be used with a 24 x 2 mm or 26 x 3 mm leg. The flat head panel makes it the ideal design for creating frameworks that will carry heavy UPS systems, server racks, transformer stations, etc. All common C-profiles can be screwed onto the frame head.

If the CF/DF head is rotated laterally, it has numerous slits and screw options, while in its longitudinal configuration it fits closely with existing walls.

It can be configured for 100 mm or 120 mm as required. This makes it the perfect head for laying reserve panels or transitions in walkways and frame areas.

The CF/DF topside comes with the 120 mm bolt as standard. However, it is equally possible to use the 100 mm bolt. It is also possible to assemble up to three profiles next to each other.


CW | DW HEAD

The claw head CW/DW topside is primarily used in switch room profile systems.

The installation can use either the 24 x 2 mm pedestals or the 26 x 3 mm.

The claw head is not only ideal for laying swathes of switch gear station floors (i.e. creating walkways).

It is perfect for fitting all available C-profiles.

Technical data

M12 AS

M12 AS Description Adjustment range in mm Weight approx.
Typ AS 2 35-51 0,18 kg
Typ AS 3 47-78 0,20 kg
Typ AS 4 57-98 0,21 kg
Typ AS 5 74-131 0,24 kg
Typ AS 6 107-168 0,26 kg
Typ AS 7 147-208 0,29 kg

M16 BS

M16 BS Description Adjustment range in mm Weight approx.
Typ BS 1 25-37 0,30 kg
Typ BS 2 35-48 0,32 kg
Typ BS 3 45-71 0,39 kg
Typ BS 4 63-94 0,40 kg
Typ BS 5 80-130 0,44 kg
Typ BS 6 120-200 0,51 kg
Typ BS 7 170-290 0,62 kg
Typ BS 8 280-400 0,75 kg
Typ BS 9 425-485 0,85 kg

M20 CS

Typ 22 CS725 – 7851,23 kg

Rango de ajuste en mm

M20 CS Description Adjustment range in mm Weight approx.
Typ 10 CS 140 – 200 0,64 kg
Typ 11 CS 175 – 235 0,69 kg
Typ 12 CS 225 – 285 0,74 kg
Typ 13 CS 275 – 335 0,79 kg
Typ 14 CS 325 – 385 0,84 kg
Typ 15 CS 375 – 435 0,89 kg
Typ 16 CS 425 – 485 0,94 kg
Typ 17 CS 475 – 535 0,98 kg
Typ 18 CS 525 – 585 1,03 kg
Typ 19 CS 575 – 635 1,08 kg
Typ 20 CS 625 – 685 1,13 kg
Typ 21 CS 675 – 735 1,18 kg
Typ 23 CS 775 – 835 1,27 kg
Typ 24 CS 825 – 885 1,32 kg
Typ 25 CS 875 – 935 1,37 kg
Typ 26 CS 925 – 985 1,42 kg
Typ 27 CS 975 – 1035 1,47 kg
Typ 28 CS 1025 – 1085 1,51 kg
Typ 29 CS 1075 – 1135 1,56 kg
Typ 30 CS 1125 – 1185 1,61 kg

M20 DS

Typ 39 DS1575 – 16353,47 kg

M20 DS Description Adjustment range in mm Weight approx.
Typ 20 DS 625 – 685 1,68 kg
Typ 21 DS 675 – 735 1,77 kg
Typ 22 DS 725 – 785 1,87 kg
Typ 23 DS 775 – 835 1,96 kg
Typ 24 DS 825 – 885 2,05 kg
Typ 25 DS 875 – 935 2,15 kg
Typ 26 DS 925 – 985 2,24 kg
Typ 27 DS 975 – 1035 2,34 kg
Typ 28 DS 1025 – 1085 2,43 kg
Typ 29 DS 1075 – 1135 2,52 kg
Typ 30 DS 1125 – 1185 2,62 kg
Typ 31 DS 1175 – 1235 2,71 kg
Typ 32 DS 1225 – 1285 2,81 kg
Typ 33 DS 1275 – 1335 2,90 kg
Typ 34 DS 1325 – 1385 3,00 kg
Typ 35 DS 1375 – 1435 3,09 kg
Typ 36 DS 1425 – 1485 3,18 kg
Typ 37 DS 1475 – 1535 3,28 kg
Typ 38 DS 1525 – 1585 3,37 kg

M20 CW

M20 CW Description Adjustment range in mm Weight approx.
Typ 8 CW 65 – 85 0,50 kg
Typ 9 CW 90 – 125 0,55 kg
Typ 10 CW 140 – 200 0,60 kg
Typ 11 CW 175 – 235 0,71 kg
Typ 12 CW 225 – 285 0,76 kg
Typ 13 CW 275 – 335 0,81 kg
Typ 14 CW 325 – 385 0,86 kg
Typ 15 CW 375 – 435 0,90 kg
Typ 16 CW 425 – 485 0,95 kg
Typ 17 CW 475 – 535 1,00 kg
Typ 18 CW 525 – 585 1,05 kg
Typ 19 CW 575 – 635 1,10 kg
Typ 20 CW 625 – 685 1,14 kg
Typ 21 CW 675 – 735 1,19 kg
Typ 22 CW 725 – 785 1,24 kg
Typ 23 CW 775 – 835 1,29 kg
Typ 24 CW 825 – 885 1,34 kg
Typ 25 CW 875 – 935 1,39 kg
Typ 26 CW 935 – 985 1,43 kg
Typ 27 CW 975 – 1035 1,48 kg

M20 DW

M20 DW Description Adjustment range in mm Weight approx.
Typ 20 DW 625 – 685 1,69 kg
Typ 21 DW 675 – 735 1,79 kg
Typ 22 DW 725 – 785 1,88 kg
Typ 23 DW 775 – 835 1,97 kg
Typ 24 DW 825 – 885 2,07 kg
Typ 25 DW 875 – 935 2,16 kg
Typ 26 DW 925 – 985 2,26 kg
Typ 27 DW 975 – 1035 2,35 kg
Typ 28 DW 1025 – 1085 2,45 kg
Typ 29 DW 1075 – 1135 2,54 kg
Typ 30 DW 1125 – 1185 2,64 kg
Typ 31 DW 1175 – 1235 2,73 kg
Typ 32 DW 1225 – 1285 2,82 kg
Typ 33 DW 1275 – 1335 2,92 kg
Typ 34 DW 1325 – 1385 3,01 kg
Typ 35 DW 1375 – 1435 3,11 kg
Typ 36 DW 1425 – 1485 3,20 kg
Typ 37 DW 1475 – 1535 3,29 kg
Typ 38 DW 1525 – 1585 3,39 kg
Typ 39 DW 1575 – 1635 3,48 kg

M20 CF

Typ 14 CF325 – 3851,08 kg

M20 CF Description Adjustment range in mm Weight approx.
Typ 7 CF 65 – 85 0,70 kg
Typ 9 CF 90 – 125 0,75 kg
Typ 10 CF 140 – 200 0,80 kg
Typ 11 CF 175 – 235 0,93 kg
Typ 12 CF 225 – 285 0,98 kg
Typ 13 CF 275 – 335 1,03 kg
Typ 15 CF 375 – 435 1,12 kg
Typ 16 CF 425 – 485 1,17 kg
Typ 17 CF 475 – 535 1,22 kg
Typ 18 CF 525 – 585 1,27 kg
Typ 19 CF 575 – 635 1,32 kg
Typ 20 CF 625 – 685 1,36 kg
Typ 21 CF 675 – 735 1,41 kg
Typ 22 CF 725 – 785 1,46 kg
Typ 23 CF 775 – 835 1,51 kg
Typ 24 CF 825 – 885 1,56 kg
Typ 25 CF 875 – 935 1,61 kg
Typ 26 CF 935 – 985 1,65 kg
Typ 27 CF 975 – 1035 1,70 kg

M20 DF

M20 DF Description Adjustment range in mm Weight approx.
Typ 20 DF 625 – 685 1,91 kg
Typ 21 DF 675 – 735 2,01 kg
Typ 22 DF 725 – 785 2,10 kg
Typ 23 DF 775 – 835 2,19 kg
Typ 24 DF 825 – 885 2,29 kg
Typ 25 DF 875 – 935 2,38 kg
Typ 26 DF 925 – 985 2,48 kg
Typ 27 DF 975 – 1035 2,57 kg
Typ 28 DF 1025 – 1085 2,67 kg
Typ 29 DF 1075 – 1135 2,76 kg
Typ 30 DF 1125 – 1185 2,85 kg
Typ 31 DF 1175 – 1235 2,95 kg
Typ 32 DF 1225 – 1285 3,04 kg
Typ 33 DF 1275 – 1335 3,12 kg
Typ 34 DF 1325 – 1385 3,23 kg
Typ 35 DF 1375 – 1435 3,33 kg
Typ 36 DF 1425 – 1485 3,42 kg
Typ 37 DF 1475 – 1535 3,51 kg
Typ 38 DF 1525 – 1585 3,61 kg
Typ 39 DF 1575 – 1635 3,70 kg

PEDESTALS with C-Profile

Pedestals with C-Profile from Weiss Raised floor systems

Also known as switchgear station floors, raised floor systems with C-profiles are used in rooms with electrical controlgear and switchgear, such as server rooms, control rooms and in areas requiring higher load carrying capacity.

The substructure comprises steel pedestals with height adjustment facility, which can be set to exactly the right height.

The substructure remains secure, even under heavy loads.

The transition from framework to walking area is on a level thanks to the connection of two different C-profiles.

This means that switchgear cabinets and other heavy items of equipment, such as transformers, UPS systems, battery cabinets and air conditioning units can be positioned on the C-profile framework directly.

This type of structure does not require any welding.

The bolted connection is permanently secured by means of hammer-head screws and it can be dismantled and used again several times without any detrimental effects on quality.

One of the major advantages of this type of construction is that it can be implemented quickly and the entire cross-section of the space under the switchgear cabinet is available for leading in cables.

Apart from this, the structure maintains its stability, even if the floor panels are open.

Pedestals with stringers

Pedestals with stringers von Weiss raised floor systems

Pedestals with stringers have steel cross braces, which are fitted into the prop heads of the underfloor construction and can also be bolted there.

The raised floor panels then rest on the sound-deadening pedestal pads and on the side faces.

This improves the horizontal rigidity of the complete underfloor construction, thereby increasing the load carrying capacity.

We recommend that stringers should be used to reinforce the substructure as a matter of principle for floor heights of 500 mm or more.

We offer various stringers to suit the respective system floor design

Product pictures

Product pictures

Back To Top